−
20
−
ME12044A
Then, loosen the fixing screw located on the rear of the sample holder, and rotate the counter arm
counterclockwise until it remains vertical. Rotate the arm as far as it will go.
Figure 6.18 Swinging up the Counter Arm by 90 Degrees (D030328A06)
Finally, install the scintillation counter. If the connector of the scintillation counter interferes with the
wall, loosen the screw fixed to the rail and shift the entire sample bench.
Figure 6.19 Fluorescence Measurement Layout (D030328A07)
Scintillation counter
Fixing screw
Sample holder
