18
INStAllAtION
L
L1
P
H
Model
1070 M 1100 M 1125 M
1125 t
1140 t
Product dimensions
H
mm
730
760
965
965
1350
L
mm
860
920
950
950
950
L1
mm
933
965
-
-
-
P
mm
308
372
370
370
370
Weight
kg
46,0
60,0
83,0
85,0
105,0
2.4
Storage
If the product is stored in a room before installation check:
—
there aren't continously operating ignition sources (open
flames, gas appliances, electric heaters,..) within a radius
of 2.5 m.
—
there is adequate ventilation
9
The product must be stored of according to the regulations
in force.
9
2.5
Handling and removal of the packing
9
before unpacking, personal protective clothing should be
worn and used transport means and tools suitable for the
size and weight of the unit.
9
Check refrigerant leak inside the packaging with a leak de-
tector suitable for the refrigerant used in the system.If a gas
leak is detected, probably the refrigerant circuit is dama-
ged and the product can't be installed; finally call Technical
Service
R
.
Product handling can also be done manually by grasping the
handles provided on the packaging.
1
Handles
2
Strapping bands
3
Document envelope and material supplied as kit
2
1
1
3
Follow the below instructions for packing removal and product
handling:
—
transport the equipment in the installation place
—
cut strapping bands
—
lift and remove the cardboard pack
—
handle the unit by grasping the handles provided.
—
remove the document envelope
9
In manual operation it is compulsory to respect always the
maximum weight per person provided for by the national
laws and standards.
9
Handle with care
9
The equipment must always be handled vertically
9
Do not tilt the equipment over 15°
9
The unit’s weight is concentrated on the compressors side
(connection covering side).
0
The packing material must not be disposed of in the sur-
rounding environment and must be kept out of children
reach, as it can be dangerous. It must be disposed of accor-
ding to the regulations in force.
0
2.6
Place of installation
The location of
R
AARIA PRO P
devices must be determined
by the system's designer or by another competent person, and
must take into account the technical requirements, as well as
any current local regulations that require specific permits to be
obtained. (e.g.: zoning, architectural, environmental protection,
etc.).
It is therefore recommended to obtain all the necessary permits
before installing the device.
R
AARIA PRO P
is designed for outdoor installation.
Avoid:
—
positioning the unit in air shafts and/or basement window
wells
—
any obstacles or barriers that will cause the expelled air to
recirculate
—
locations with aggressive or explosive atmospheres or with
inflammable fluids
Содержание 20153499
Страница 29: ...29 Installation MODEL 1100 M ...
Страница 31: ...31 Installation MODEL 1125 T 1140 T ...
Страница 42: ......
Страница 43: ......