Riedel Bolero 2.0, Руководство пользователя

Страница: 36 / 130

36
Bolero 2.0 User Manual
QoS (IEEE 802.1p), based on DiffServ (RFC 2474)
·
Traffic from the Bolero Antennas can be
prioritized when transmitted through a larger
network.
·
Extremely important when the network
contains more than one switch.
·
Prioritization on:
a. PTP [E, F]
b. AES67 [AFU1]
PTPv2 (IEEE 1588) boundary clock or transparent clock
Required to build networks with more than three switches and other traffic.
·
Provides better synchronization of Bolero
Antennas. The synchronization offset must not
exceed 1 microsecond.
·
Critical, if the network contains a lot of other
devices (Video over IP, Servers, ...).
·
Supported PTP mode:
• AES67 profile
• End-to-End delay measurement
• Multicast traffic mode
When using Power over Ethernet use PoE + (PoE plus ) switches only!
The power of switches that are supporting PoE only is not sufficient!
A 1Gbit Ethernet connection is necessary to operate the Bolero net.
Network Size Classifications Requirements
Small
·
Up to 20 Beltpacks and 5 Antennas
·
Only Riedel audio traffic
·
Central switch or stacked switches
·
IGMP snooping
·
QoS
Medium
·
Up to 50 Beltpacks and 20 Antennas
·
Only Riedel audio traffic
·
Up to three switch hops
·
IGMP snooping
·
QoS
Large
·
Up to 100 Beltpacks and 100 Antennas
·
Mixed traffic
·
More than three hops
·
IGMP snooping
·
QoS
·
PTP boundary clock or
PTP transparent clock