Riedel Bolero 2.0, Руководство пользователя

Страница: 3 / 130

This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux
deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
Changes or modifications made to this equipment not expressly approved by Riedel may void the FCC authorization to operate this equipment.
Radiofrequency radiation exposure Information (for the Beltpack):
For body worn operation, this equipment has been tested and meets the FCC RF exposure guidelines when used with the Riedel accessories
supplied or designated for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.
Radiofrequency radiation exposure Information (for the Antenna):
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
Beltpack: Este produto está homologado pela Anatel, de acordo com os procedimentos regulamentados pela Resolução n°. 242/2000 e atende aos
requisitos técnicos aplicados, incluindo os limites de exposição da Taxa de Absorção Específica referente a campos elétricos, magnéticos e
eletromagnéticos de radiofreqüência de acordo com as Resoluções n°. 303/2002 e 533/2009.
This device is granted pursuant to the Japanese Radio Law ( ) and the Japanese Telecommunications Business Law ( ). This
device should not be modified (otherwise the granted designation number will become invalid).
Taiwan NCC Warning Statement
(930322)
The device conforms to the following EU guidelines
as attested by the CE mark.
·
EMV (EMC) 2014/30/EU
·
NSR (LVD) 2014/35/EU
·
RTTE (RED) 2014/53/EU
·
YFJANT101019
(Bolero DECT Antenna / BL-ANT-1010-19)
·
YFJBPK100619
(Bolero Wireless Beltpack / BL-BPK-1006-19)
Standards
·
EN 300 328 V1.9.1 / ETSI EN 300 328 V2.0.20
·
EN 300 330 V1.8.1 / ETSI EN 300 330 V2.1.0
·
EN 301 406 V2.2.1
·
EN 301 489-1/-3/-6/-17, EN 55022, EN 55024
·
IEC/EN 60950-1, IEC 62368-1
·
ARIB STD-T66
·
ARIB STD-T101
Industry
Canada
·
8706A-ANT101019
(Bolero DECT Antenna / BL-ANT-1010-19)
·
8706A-BPK100619
(Bolero Wireless Beltpack / BL-BPK-1006-19)
Australia
Any device that connects to the data ports must
comply with the clause 4.7 of AS/NZS 60950.1
Warning: This equipment is compliant with Class A of CISPR 32. In a
residential environment this equipment may cause radio interference.
Singapore
Complies with
IMDA Standards
DB105184
Taiwan
Complies with
BSMI Standards