Riedel Bolero 2.0, Руководство пользователя

Страница: 91 / 130

91
Bolero 2.0 User Manual
4.4.4 Beltpacks
The Beltpacks window lists all registered Beltpacks of the active network space.
Beltpacks are listed even if they are not connected (out of range, turned off). Once a Beltpack is registered, after
powering up it will instantly connect and become operational.
The registered Beltpack list shows the Beltpack status information with remaining battery capacity.
The icon in the
Locate column displays the status of the Beltpack.
When you are logged in as admin user, it is possible to edit Beltpack settings by clicking the edit icon.
The
Registered Beltpacks
window features the following functions:
·
Listing of all registered Beltpacks in the Net.
·
Changing of Beltpack settings
·
Changing of assigned Profiles
·
Removing Beltpacks from Nets
·
Enable registration
·
Locating Beltpacks
Figure 130: Web-Interface – Beltpacks
Locate This feature is useful to identify a specific Beltpack visually. After clicking this icon, the Status-LED
and the Status-Bar of the respective Beltpack will start flashing yellow until any key is pressed on
the Beltpack.
Name
*
Name of the Beltpack.
ID
*
Unique ID of the Beltpack.
Profile
*
Name of the assigned Profile.
Last Conn. Date and time of last connection.
Antenna Name of the Antenna, the Beltpack is connected to.
Battery State of battery of the Beltpack.
Edit Button to edit the Beltpack settings.
If the switch is enabled (
On
), the
Name
,
ID
and
Profile
of a Beltpack are directly editable in the
Beltpacks window by clicking on the desired entry.
*
direct editable if the switch Direct Edit is enabled