Rieber ACS 1600 O3 Digital Скачать руководство пользователя страница 27

Страница: 27 / 64

Before First Use

Rieber GmbH & Co. KG

Before First Use

This chapter describes the measures to be taken before use.

6.1

Transport

# Check/handle any transport damage

➢

Immediately after delivery, visually check the appliance for any transport damage.

➢

Document any potential transport damage on the consignment note in the presence of the haulage
contractor. Have the damage confirmed by the haulage contractor (with signature).

➢

Decide if you wish to keep the appliance and report the defect using the consignment note, or if
you wish to reject the appliance.

▌

By following this procedure you will ensure proper claim settlement.

# Unpack

➢

Open the transport packaging at the positions provided for this purpose. Do not tear or cut.

➢

Remove any packaging remnants.

# Unload appliance from the pallet

Unloading from the pallet (optional delivery condition)

➢

WARNING

Unloading from the pallet may only be carried out by suitable and trained operating personnel.
Approx. 240 kg

ATTENTION

Do not unload the appliance from the pallet using the fork-lift truck, as this could cause
substantial damage.

►

Unloading from the pallet (optional delivery condition) may only be carried out by

suitable and trained operating personnel.

# Dispose of packaging material

You may need the pallet for further transport.

➢

Dispose of the disposable packaging with respect for the environment.

Содержание ACS 1600 O3 Digital

































































Результаты поиска

Содержание ACS 1600 O3 Digital

Отзывы:

Бренды по названию

Популярные бренды

Rieber ACS 1600 O3 Digital, Руководство по эксплуатации

Результаты поиска

Содержание ACS 1600 O3 Digital

Отзывы:

Бренды по названию

Популярные бренды