Rieber ACS 1600 O3 Digital Скачать руководство пользователя страница 11

Страница: 11 / 64

Safety instructions

Rieber GmbH & Co. KG

3.6.3

Risks due to opened technical compartment

The technical compartment contains electrical parts.

Before opening the technical compartment

➢

Switch

the ‘ON/OFF pushbutton with indicator light’ to OFF.

▌

The LED is off.

▌

The fan wheel is stationary.

➢

Remove the mains plug if necessary.

➢

Use a suitable tool to open and close the technical compartment.

➢

Keep the technical compartment closed.

3.6.4

Risks during transport

The weight of the

empty appliance

around 237 kg; maximum permissible loading is 200 kg.

There are numerous hazards, such as crushing of parts of the body.

➢

Remove accessories and transport them separately.

➢

Disconnect the connection cable.

➢

Keep the doors closed during transport.

➢

Transport the appliance on a level surface. Do not transport on a sloped surface, as you could lose

control of the heavy appliance and hazardous situations could result.

➢

Move the appliance with an adequate number of people,

at least 2

➢

Transport only permissible using the castors.

➢

Secure the appliance against inadvertently rolling away with the ‘parking brake’.

➢

Wear safety shoes to prevent injuries.

ATTENTION

Uneven ground such as edges, ridges or thresholds can damage the castors.

►

Only move the appliance over flat, smooth surfaces. Do not push or pull the

appliance over sharp edges.

►

Do not use this appliance with poor floor conditions.

We are not able to rule out the possibility of marks appearing on the floor due to
friction with castors or the formation of scratches due to split cracks in the castors,
for example.

Содержание ACS 1600 O3 Digital

































































Результаты поиска

Содержание ACS 1600 O3 Digital

Отзывы:

Бренды по названию

Популярные бренды

Rieber ACS 1600 O3 Digital, Руководство по эксплуатации

Результаты поиска

Содержание ACS 1600 O3 Digital

Отзывы:

Бренды по названию

Популярные бренды