Ricoh S-C4.5, Руководство по обслуживанию на месте

Страница: 354 / 436

SP2-XXX (RAM Data)
2 Mode No. Function
101
RAM Read/Write
001
Change RAM data for the fax board directly. (
"Service RAM Addresses")
102
Memory Dump
001 G3-1 Memory Dump
Print out RAM data for the fax board.
( "Service RAM Addresses")
103
G3-1 NCU Parameters
001 – 023 CC, 01 – 22
NCU parameter settings for the standard G3 board.
( "NCU Parameters")
SP3-XXX (Tel Line Settings)
3 Mode No. Function
101
Service Station
001 Fax Number Enter the fax number of the service station.
102
Serial Number
000 Enter the fax unit’s serial number.
103
PSTN-1 Port Settings
001 Select Line
Select the line type setting for the G3-1 line. If the
machine is installed on a PABX line, select “PABX”,
“PABX(GND)” or “PABX(FLASH)”.
002
PSTN Access
Number
Enter the PSTN access number for the
G3-1 line.
003
Memory Lock
Disabled If the customer does not want to receive transmissions
using Memory Lock on this line, turn this SP on.
5. Appendix: Fax Service Program
158
5