Ricoh S-C4.5, Руководство по обслуживанию на месте

Страница: 164 / 436

No.
Definition
Symptom Possible Cause/Countermeasure
-005 C
Communication line error
The supplied voltage is not sufficient due
to the defective communication line or
defective connection.
1. Consult with the user's local telephone
company.
651
Incorrect dial up connection
An unexpected error occurs when the modem (RCG-M) tries to call the center with a dial up
connection.
-001 D Program parameter error • Software bug.
1. No action required because this SC
does not interfere with operation of the
machine.
-002 D Program execution error
670 B
Engine startup error
Just after the main power is turned on or
the machine is recovering from auto off
mode, the engine ready signal assertion
fails.
Just after the main power is turned on, the
engine does not respond.
• Poor connection between the BICU
and controller board
• Defective BICU
• Defective controller board
672 B
Controller-to-operation panel communication error at startup
After powering on the machine,
communication between the controller
and operation panel does not begin, or
the communication is interrupted after a
normal startup.
• Controller stalled
• Controller board installed incorrectly
• Defective controller board
• Operation panel connector loose or
defective
• Poor connection of DIMM and
optional boards on the controller
board
1. Check the setting of SP5875-001. If
the setting is set to "1 (OFF)", change
it to "0 (ON)".
6. Troubleshooting
162
6