Ricoh S-C4.5, Руководство по обслуживанию на месте

Страница: 342 / 436

Code Meaning Suggested Cause/Action
15-81
Repeated Destination
Registration Error
• Could not repeat receive the transmission because the
destination buffer is full and the destination could not
be created (this error may occur when receiving a
transfer request or a request for notification of
reception).
15-91 Send Registration Error
Could not receive the file for transfer to the final destination:
• The format of the final destination or the transfer
destination is incorrect.
• Destinations are full so the final and transfer
destinations could not be created.
15-92 Memory Overflow
• Transmission could not be received because memory
overflowed during the transaction.
15-93 Memory Access Error
• Transaction could not complete due to a malfunction
of SAF memory.
15-94 Incorrect ID Code
• The machine rejected an incoming e-mail for transfer
request, because the ID code in the incoming e-mail
did not match the ID code registered in the machine.
15-95 Transfer Station Function
• The machine rejected an incoming e-mail for transfer
because the transfer function was unavailable.
22-00
Original length exceeded the
maximum scan length
• Divide the original into more than one page.
• Check the resolution used for scanning. Lower the scan
resolution if possible.
• Add optional page memory.
22-01
Memory overflow while
receiving
• Wait for the files in the queue to be sent.
• Delete unnecessary files from memory.
• Transfer the substitute reception files to an another fax
machine, if the machine’s printer is busy or out of order.
• Add an optional SAF memory card or hard disk.
22-02
Tx or rx job stalled due to line
disconnection at the other end
• The job started normally but did not finish normally;
data may or may not have been received fully.
• Restart the machine.
4. Appendix: Fax Troubleshooting Guide
146
4