Ricoh S-C4.5, Руководство по обслуживанию на месте

Страница: 257 / 436

151
Aut Line Detect
Press [Execute].
Setting this SP classifies the telephone line where embedded RCG-M is connected as either
dial-up or push type, so embedded RCG-M can automatically distinguish the number that
connects to the outside line.
• The current progress, success, or failure of this execution can be displayed with
SP5816 152.
• If the execution succeeded, SP5816 153 will display the result for confirmation and
SP5816 154 will display the telephone number for the connection to the outside line.
152
Line Detect Rst
Displays a number to show the result of the execution of SP5816 151. Here is a list of what
the numbers mean.
0: Success
1: In progress (no result yet). Please wait.
2: Line abnormal
3: Cannot detect dial tone automatically
4: Line is disconnected
5: Insufficient electrical power supply
6: Line classification not supported
7: Error because fax transmission in progress – ioctl() occurred.
8: Other error occurred
9: Line classification still in progress. Please wait.
153
Dial/Push Select
This SP displays the classification (tone or pulse) of the telephone line to the access point
for embedded RCG-M. The number displayed (0 or 1) is the result of the execution of
SP5816 151. However, this setting can also be changed manually.
[0 to 1 / 0 / 1 /step]
0: Tone Dialing Phone
1: Pulse Dialing Phone
Inside Japan "2" may also be displayed:
0: Tone Dialing Phone
1: Pulse Dialing Phone 10PPS
2: Pulse Dialing Phone 20PPS
System Service Mode
61
3