Ricoh LP124w Скачать руководство пользователя страница 284

Страница: 284 / 376

Monitoring and Configuring the Printer

270

Name registration failed. name= <NetBIOS
name>

Name registration of <NetBIOSName> failed.
Change to different NetBIOS name.

nbtd start.

The nbtd service has started.

nprinter start (Netware)

(In the remote printer mode) The NetWare ser-
vice has started.

nwstart start. (NetWare)

The service for NetWare protocol stack setting
has started.

Open log file <file name>

(In the print server mode) The specified log file
has been opened.

phy release file open failed.

Replacing the network interface board is re-
quired. Contact your sales or service represen-
tative.

Print queue <print queue name> cannot be
serviced by printer 0, <print server name>

(In the print server mode) The print queue
cannot be established. Make sure that print
queue exists on the specified file server.

Print server <print server name> has no print-
er.

(In the print server mode) The printer is not as-
signed to the print server. Using NWadmin,
assign the printer, and then restart it.

print session full

No more print jobs can be accepted.

Printer <printer name> has no queue

(In the print server mode) The print queue is
not assigned to the printer. Using NWadmin,
assign the print queue to the printer, and then
restart it.

pserver start. (NetWare)

(In the print server mode) The NetWare ser-
vice has started.

Required file server (<file servername>) not
found

The required file server is not found.

received EAP Failure

EAP reception failed.

restarted.

The lpd service has started.

sap enable, saptype= <SAP type>, sapname=
<SAP name>

The SAP function has started. The SAP packet
is issued to advertise the service on the SAP ta-
ble on the NetWare server.

server identity invalid

The server ID is disabled. Check the server au-
thentication.

session IPv4 <community name> not defined. The requested community name is not de-

fined.

session IPv6 <community name> not defined. The requested community name is not de-

fined.

session <community name> already defined.

The requested community name is not de-
fined.

session_ipx <community name> not defined.

The requested community name is not de-
fined.

Message

Problem and solutions

Содержание LP124w
























































































































































































































































































































































































Результаты поиска

Содержание LP124w

Отзывы:

Бренды по названию

Популярные бренды

Ricoh LP124w, Руководство пользователя программного обеспечения

Результаты поиска

Содержание LP124w

Отзывы:

Бренды по названию

Популярные бренды