Ricoh LP124w, Руководство пользователя программного обеспечения

Страница: 228 / 376

Monitoring and Configuring the Printer
214
6
Sending On-demand E-mail
To use on-demand e-mail notification, perform the following configuration
tasks in Web Image Monitor.
A
In the menu area, click [ Configuration ] , and then click [ E-mail ] in “Device
Settings”.
B
Make the following settings:
• E-mail Notification E-mail Address: Enter the address using alphanumeric
characters.
• Receive E-mail Notification: Specify whether to use on-demand e-mail no-
tification.
• E-mail Notification User Name: Enter the administrator’s user name as the
mail originator name.
• E-mail Notification Password: Enter the password of the mail notification
user.
C
Click [ OK ] .
D
Click [ Logout ] .
E
Quit Web Image Monitor.
❖
Format of on-demand e-mail messages
To use mail notification, you need to send an on-demand e-mail message
to this printer. Using your mail software, enter the following:
Note
❒
A mail message must be within 10 KB in size.
❒
E-mail may be incomplete if sent immediately after power on.
❖
Subject field
Format: devicestatus?parametername=parameter
[ &=parameter ][ & =parame-
ter ] ...
Note
❒
The Subject field is case-insensitive.
❒
Parameter names can be written in any order.
Item Description
Subject (Referred to as Subject) Enter a request regarding the device. For
details, see the table below.
From (Referred to as From) Specify a valid mail address. The device in-
formation will be sent to the address speci-
fied here.