Ricoh IM C530 Series, Руководство пользователя

Страница: 238 / 288

Message Cause Solution and reference
"Authentication has
failed."
L0406-201 [Off] is specified in the
authentication settings of
the LDAP server. Select the server in [Settings] [System
Settings] [Settings for Administrator]
[Authentication/Charge] [Administrator
Authentication/User Authentication/App
Auth.] [Register/Change/Delete LDAP
Server], and then press [Register/Change]
and set “Authentication” to a setting other than
[Off].
"Authentication has
failed."
L0406-202
L0406-203 The LDAP authentication
(Custom authentication)
settings or LDAP server
settings are incorrect. Check whether the LDAP authentication
(Custom authentication) settings or LDAP server
settings are correctly configured.
*4
Check whether the SSL settings are supported
on the LDAP server.
The login user name or
password is incorrect. Enter the correct login user name and
password. Change the login user name if it
exceeds 128 bytes in length or contains a
space, ":" or other unusable character.
The simplified
authentication mode is
incorrectly used. Check whether the server name, login user
name, password, and information entered into
the search filter are correct. Note that
authentication cannot be performed if
obtaining DN of the login user name under the
representative account fails in the simple
authentication mode.
"Authentication has
failed."
L0406-204 Kerberos Authentication
has failed. Check whether the realm name registered on
the clock at the KDC (key distribution center)
and the clock of the device are
synchronized.
*3
"Authentication has
failed."
W/L0409-000 There was no response
returned from the
authentication server,
and an authentication
timeout error occurred. Check the status of the network and the server
to use for authentication.
8. Troubleshooting
236