Ricoh IM C530 Series, Руководство пользователя

Страница: 214 / 288

Message Cause Solution and reference
"Exceeded the
maximum unit count
for Print Volume Use.
The job has been
cancelled." When the print
volume is limited,
printing was
canceled because
the print volume of
a user exceeded the
upper limit allotted
for the user. For details about the print volume use limitation, consult
the user administrator. The user administrator can clear
the counter or change the limit on the print volume.
See "Checking the Counter of the Machine for Each
Color Category", User Guide (Full Version).
See "Specifying Maximum Print Volume Use of Each
User", User Guide (Full Version).
"File system is full." The file system is
full, and the PDF file
cannot be printed. Erase documents that are no longer needed.
See "Deleting a Locked Print File Stored in the
Machine", User Guide (Full Version).
"Hardware Problem:
USB" An error has
occurred on the
USB interface. Turn off the power of the machine, wait for 10 seconds
or more after confirming that the main power indicator
is turned off, and then turn on the power.
page 9 "Turning On and Off the Power"
If the message persists even after you have turned the
power off and then on, consider repairing the machine.
"Hardware Problem:
Ethernet" An error has
occurred in the
Ethernet interface.
"Hardware Problem:
Wireless Card" An error has
occurred in the
Wireless LAN
board. Turn off the power of the machine, check that the
Wireless LAN board is correctly installed in the
machine, and then turn on the power.
page 9 "Turning On and Off the Power"
If the message persists even after you have turned the
power off and then on, consider repairing the machine.
"I/O buffer
overflow." An overflow has
occurred in the
receive buffer. • Reduce the transmission data.
Increase the value in [I/O Buffer] on [Settings]
[Printer Settings] [Host Interface].
8. Troubleshooting
212