GlobalScan
TM
Ver. 2.0
Administrator’s Guide
50
Step 3:
Enter/Edit GlobalScan V1.5 Settings
(if applicable)
GlobalScan V2.0 is backward compatible with MFDs running GlobalScan firmware Version
1.5. The GlobalScan V1.5 screen, shown below, is profile-independent, which means MFDs
running V1.5 firmware do not access projects defined under a profile, as does V2.0. Only
MFD authentication settings and Services applied here will be executed on an MFD running
V1.5 firmware. To establish these settings, proceed as outlined below.
Note
: If all MFDs are running GlobalScan Version 2.0 firmware, please proceed to Step 4: Enter/Edit System
Parameters.
1.
Click
GS 1.5 Settings
.
Display reads…
A.
MFD Authentication
, if applicable, select the authentication method from the drop-down
menu.
•
None
– The MFD user is not required to enter a user name, password, etc.
•
NT
and
Novell
– Screens appear similar to that shown
at right.
Note
: Novell configuration is always available on the profile level, so
MFDs running GlobalScan Ver. 1.5 firmware will use the profile’s
Novell settings.
A
B
Note
: All Category 3 Services designed
around the GlobalScan Ver.1.5 SDK that
require authentication (i.e., have login ASP
page), for example, FileNET, will also display
Grayed-out settings
indicate the Service is
always available