17 January, 2003
TRANSFER AND PAPER TRANSPORT UNIT
3-21
R
eplacement
Ad
ju
st
m
en
t
3.7 TRANSFER AND PAPER TRANSPORT UNIT
3.7.1 TRANSFER UNIT
NOTE:
1) When removing or installing the transfer unit, grasp the central areas of
the front and rear frame. Do not touch the transfer belt [A]. Do not
damage the entrance mylar [B].
2) Remove the duplex feed unit (if it is installed) before replacing the
transfer unit.
3) After replacing the transfer unit, reset the maintenance counter, SP7-
804-16, and conduct the output check, SP5-804-74.
1. Turn the release lever counterclockwise. (
☛
3.5)
2. Pull out the transfer unit [C] until the entire unit is visible (
!
x 2).
3. Grasp the transfer unit grips as shown above. Lift the unit to remove it.
NOTE:
Grasp the front grip. Use caution not to damage the actuator on the rear.
After replacing the transfer unit:
•
Perform forced line position adjustment (SP5-993-002 or “Maintenance menu –
Color Registration - Auto Adjust” in User Program mode).
•
Print the 1-dot grid pattern on A3/11" x 17" paper and check the color shift level
(
☛
4.4.3).
G080R737.WMF
[A]
[C]
[B]