17 January, 2003
PRINTER ENGINE SERVICE MODE
5-31
Service
Tables
2
Mode No.
(Class 1, 2, and 3)
Function / [ Setting ]
2 [FC,K]
1200
*BCU
[ 0 to 20000 / 15038 / 1 dot ]
DFU
3 [FC,Y]
1200
*BCU
[ 0 to 20000 / 10402 / 1 dot ]
DFU
4 [FC,M]
1200
*BCU
[ 0 to 20000 / 1136 / 1 dot ]
DFU
5 [FC,C]
1200
*BCU
[ 0 to 20000 / 5762 / 1 dot ]
DFU
6 [K]
600
*BCU
[ 0 to 20000 / 3755 / 1 dot ]
DFU
7 [FC,K]
600
*BCU
[ 0 to 20000 / 7519 / 1 dot ]
DFU
8 [FC,Y]
600
*BCU
[ 0 to 20000 / 5201 / 1 dot ]
DFU
9 [FC,M]
600
*BCU
[ 0 to 20000 / 568 / 1 dot ]
DFU
916
10 [FC,C]
600
*BCU [ 0 to 20000 / 2881 / 1 dot ]
DFU
[MScan Lgth Det]
Main-scan Length Detection
919
1
MScan Lgth D
*BCU Enables or disables the main-scan length
detection.
[ 0 or 1 / 1 / - ] Alphanumeric
0: Disable
1: Enable
[MScan Reg Cor]
Main-scan Registration Correction ([Color])
Not used.
DFU
1 [Y]
*BCU [ -128 to 127 / 0 / 1 dot/step ]
DFU
2 [M]
*BCU [ -128 to 127 / 1 / 1 dot/step ]
DFU
3 [C]
*BCU [ -128 to 127 / 1 / 1 dot/step ]
DFU
994
4 [K]
*BCU [ -128 to 127 / 0 / 1 dot/step ]
DFU
[Motor Reset]
Mirror Positioning Motor Reset
995
1
Motor Reset
*BCU Rotates the mirror position motors (CMY) by 250
pulses clockwise; then by 125 pulses
counterclockwise. This moves the mirrors back to
the initial position. Then, the settings of SP2-908-
002 to 004 are reset to 0.
When the line position adjustment fails, it is one of
possible causes when the mirror position motor
locks. Performing this SP mode can move the
mirrors back to the original position if it locks.
Then, do the forced line position adjustment (SP5-
993-002).