17 January, 2003
PRINTER CONTROLLER SERVICE MODE
5-11
Service
Tables
1
Mode No.
(Class 1 and 2)
Function / [ Setting ]
22 Cyan:
Shadow
23 Cyan:
Middle
24 Cyan:
IDmax
41 Magenta:
Highlight
42 Magenta:
Shadow
43 Magenta:
Middle
44 Magenta:
IDmax
61 Yellow:
Highlight
62 Yellow:
Shadow
63 Yellow:
Middle
104
64 Yellow:
IDmax
*
CTL
CF
Adjusts the printer gamma for the mode selected
in the “Mode Selection” menu.
[ 0 to 30 / 15 / 1/step ]
[ToneCtlSave]
105
1 ToneCtlSave
Stores the print gamma adjusted with the “Gamma
Adj.” menu item as the current setting. Before the
machine stores the new “current setting", it moves
the data currently stored as the ‘current setting’ to
the “previous setting” memory storage location.
[Toner Limit]
1 TonerLimitPhot
Adjusts the maximum toner amount for image
development.
[ 100 to 400 / 260 / 1 %/step ]
106
2 TonerLimitText
*CTL
[ 100 to 400 / 190 / 1 %/step ]
FactoryTestPrt
107
1 600 x 600 2 bit
Prints the test page to check the color balance
before shipment.
DFU
5.3.2 BIT SWITCH PROGRAMMING
NOTE:
Currently, the bit switches are not being used.
1. Enter the SP mode, select “Service Menu", then
press [Enter] twice.
2. Select #1, #2, #3, or #4 for the desired bit switch,
then press [Enter].
•
[
▲
] [
▼
]: Move to the next switch.
3. Adjust the bit switch using the following keys.
•
[
▲
] [
▼
]: Move to the next bit.
•
[Escape]: Exit without saving changes.
•
[Enter]: Exit and save changes.
NOTE:
The left digit on the display is bit 7 and the right digit is bit 0.
4. Press [Enter] to save changes and exit.
<Service>
Bit Switch >>
Bit Switch
Bit switch 1
Sw#1
00000000
bit0
_