SERVICE PROGRAM MODE – CF CONFIGURATION
17 January, 2003
5-8
Exiting Service Mode
Press the Exit key on the touch-panel.
NOTE:
To make the following settings effective, you must turn the main switch off
and on after exiting service mode.
SP Modes Related to the Engine
SP Modes Related to the Controller
SP2-208-009
SP2-213-001
SP2-224-001 to 004
SP5-930-001 to 005
SP5-994-001 and 002
SP5-998-001
SP5-009-001
SP5-302-002
SP5-801-003 to 013
SP5-824-001
SP5-825-001
SP5-832-001 to 004
SP5-961-001
NOTE:
If the settings of SP modes 5-993-013 to 015 are changed, these changes
will affect the next line position adjustment.
5.2.3 REMARKS
Display on the Control Panel Screen
Since the maximum number of characters which can be displayed on the control
panel screen is limited (20 characters), the description of SP modes displayed on
the screen needs to be abbreviated (
☛
5.1.2).
The process speed (mm/s) depends on the print mode (B&W or Color), resolution,
and/or type of paper selected. Some SP mode settings depend on the process
speed (
☛
5.1.2).
Others
Some symbols are used in the SP mode tables (
☛
5.1.2).