OPTIONAL UNIT INSTALLATION
17 January, 2003
1-22
7. Secure the two grounding wires [A]
(
!
x 2 each). There is a wire at the left
side and one at the right side.
8. Attach the securing brackets [B] to the
left and right arms as shown (1 thumb
screw [C] for each).
Docking the Rack and Printer Mainframe
NOTE:
If the Finisher is going to be
installed, the mounting bracket of
the rail should be attached
after
docking the mainframe with the
rack. In addition, the Finisher
should be attached after docking
is complete.
1. Remove the paper tray and front
stand [A] from the paper feed unit as
shown (
!
x 2).
2. Remove the brackets [B] and rear
stand [C] (
!
x 1 for each).
3. Reinsert the paper tray.
NOTE:
Since the front and rear
stands will no longer be
necessary, dispose of them
according to local
regulations.
4. Place the assembled rack down in
the area where the mainframe is to
be installed.
5. Adjust the height of the side stand
legs for stabilization if necessary.
CAUTION:
The stand is designed to support objects placed on the table only after
the rack and mainframe have been docked. Therefore, use caution in
handling the assembled stand before docking, as it is relatively
unstable.
G367I104.WMF
G367I201.WMF
G367I202.WMF
[B]
[B]
[C]
[A]
[B]
[C]
[A]