SERVICE PROGRAM MODE
17 January, 2003
5-2
Accessing the Required Program
Use the “Up/Down arrow” keys to scroll through the menu listing.
1. Service: Controller service modes
2. Engine: Engine service modes
3: End:
Exit service mode
To select an item, press the Enter key. Then a sub-menu will appear.
Scroll through the sub menu items using the Up/Down arrow keys.
To go back to a higher level, press the Escape key.
Inputting a Value or Setting for a Service Program
Enter the required program mode as explained above. The setting appearing on
the display is the current setting.
Select the required setting using the Up/Down arrow keys, then press the Enter
key. The previous value remains if the Enter key is not pressed.
Exiting Service Program Mode
Select “3. End” from the main menu of the service program mode, then press the
“Enter” key.
NOTE:
To make the following settings effective, you must turn the main switch off
and on after exiting the service program mode.
SP Modes Related to the Engine
SP Modes Related to the Controller
SP2-208-009
SP2-213-001
SP2-224-001 to 004
SP5-905-007
SP5-930-001 to 005
SP5-994-001 and 002
SP5-009-001
SP5-961-001
SP5-824-001
SP5-825-001
NOTE:
If the settings of SP modes 5-993-013 to 015 are changed, these changes
will affect the next line position adjustment.