Ricoh FAX7000L, Руководство по обслуживанию на месте

Страница: 113 / 377

SCU Bit Switch 10
BIT FUNCTION
DATA COMMENTS
0 Automatic charge
0: Enabled If this bit is at 0, the charge control report is automatically
control report out- 1: Disabled printed out once a month, on a fixed date that is decided by a
put RAM address setting. If the bit is 1, the report can only be
printed by function 72.
1
Error code listing 0: Enabled If this bit is 1, error codes are not printed on error reports, and
on error reports 1: Disabled the user will never see any error codes.
2 Explanation of 0: Brief
0: A few of the codes and symbols used on the Journal are ex-
codes and symbols 1: Detailed
plained at the bottom of the report.
on the Journal 1: A more detailed list is given.
3 Printing of dedi- 0: Disabled If this bit is 1, the dedicated tx parameters for each Quick
cated tx
1: Enabled
Dial/Speed Dial will be listed. This is a useful check for service
parameters on the personnel, but this bit should be kept at 0 during normal
Quick Dial and operation.
Speed Dial lists
4
Not used Do not change the factory setting.
5 Not used Do not change the factory setting.
6 Not used Do not change the factory setting.
7 Printing of a 0: Enabled If this bit is 0, the first few inches of the message are printed at
sample of the
1: Disabled the bottom of the report as a reference for the user.
stored message on
memory, transmis-
sion, error, and poll-
ing clear reports
2-61