Ricoh FAX7000L, Руководство по обслуживанию на месте

Страница: 241 / 377

Symptom Action
Blank or faint copies 2. If there is nothing wrong with the printer, check the scanner. Check that
(continued) the connections from the SBU - VPU and from VPU - SPU are not loose.
Is there a video signal from the SBU, and is the white level normal?
Y N
Adjust the white level. Replace the SBU, VPU, SPU, or SCU
if necessary.
3. Does the problem only occur when printing from memory?.
Y N
Go to step 4.
Check that the connections from the SPU and PSU to the hard disk are
not loose. Does the PSU send + 5V and + 12V to the hard disk?
Y N
Replace the PSU.
Replace the hard disk, SPU, or SCU.
4. If the problem only occurs during transmission or reception, and not in copy or
printer test mode, check the connections from the SPU to the CCU, and from
the CCU to the modem and NCU, and from the NCU to the line. Check for
severe line problems. If the problem cannot be found, replace the CCU, NCU,
modem, SPU, or SCU.
5-6