Ricoh Aficio SP C411DN, Руководство пользователя программного обеспечения

Страница: 35 / 354

Using the Standard TCP/IP Port
23
1
C
Select an interface language, and then click [ OK ] .
The default interface language is English.
D
Click [ PostScript 3 Printer Driver ] .
Add Printer Wizard starts.
E
Click [ Next > ] .
F
Click [ Local printer ] , and then click [ Next > ] .
G
Click [ Create a new port: ] .
H
Click [ Standard TCP/IP Port ] , and then click [ Next > ] .
I
Click
[ Next > ]
in the
[ Add Standard TCP/IP Printer Port Wizard ]
dialog box.
J
Enter the printer name or IPv4 address in the [ Printer Name or IPv4 Address ]
box, and then click [ Next > ] .
When screen for Device selection appears, select “RICOH NetworkPrinter
Driver C Model”.
K
Click [ Finish ] in the [ Add Standard TCP/IP Printer Port Wizard ] dialog box.
L
Check that the name of the printer whose driver you want to install is se-
lected, and then click
[ Next > ] .
M
Change the printer name if you want, and then click [ Next > ] .
Select the [ Yes ] check box to configure the printer as default.
N
Click [ Next > ] .
O
Specify whether or not to print a test page, and then click [ Next> ] .
P
Click [ Finish ] .
The printer driver installation starts.
Note
❒
Auto Run may not work with certain operating system settings. If this hap-
pens, launch “Setup.exe” on the CD-ROM root directory.
❒
The printer driver with the selected language will be installed. The English
printer driver is installed when the following language is selected: Cestina,
Magyar, Polski, Portugues, Suomi.
❒
A User Code can be set after the printer driver installation . For informa-
tion about User Code, see the printer driver Help.