Ricoh 402252 - IS 300e, Руководство по эксплуатации

Страница: 123 / 224

Original Orientation
115
4
Settings for Print Scan in duplex scanning
• When you perform a Print Scan operation while scanning both sides of orig-
inals, set the originals in the ADF as illustrated below, regardless of the width
of the originals.
• Select (2 Sided Orig.
→
1 Sided Print) or (2 Sided Orig.
→
2 Sided Print) to per-
form duplex scanning, by using
[ Duplex ]
under
[ 5.Print Settings ]
on this ma-
chine. See p.79 “Duplex” for details.
Limitation
❒
When you select duplex scanning in a Print Scan operation, scanning of the originals
is fixed to top to top. This means that the originals must be bound on either side.
❒
When you select 2-sided print, the printout orientation is fixed to top to top.
❒
When the originals are bound at the top, or when you do not set the origi-
nals as illustrated above, you’ll never have the printout results as expected.
Settings for Send Scan
(Use
[ Original Settings ] in
[ Print Settings ] )
Select [ : 2 Sided: Top to
Top ] .
Select [ : 2 Sided: Top to
Top ] .
When the original is bound at
the top: When the original is bound at the
top:
Setting when the net-
work TWAIN driver is
used
Set
[ Orientation: ]
to ,
[ Side: ]
to “ Duplex (Top to Bottom) ”,
and
[ Document: ] to “ ADF ”.
Set
[ Orientation: ]
to ,
[ Side: ]
to
“ Duplex (Top to Bottom) ”, and
[ Document: ] to “ ADF ”.
Settings for Send Scan
(Use
[ Original Settings ]
in
[ Print Settings ] )
[ : 2 Sided: Top to Bottom ]
[ 2 Sided:TtoB ] .
[ : 2 Sided: Top to Bottom ]
[ 2 Sided:TtoB ] .
Original width 297mm (11.7”) or less wider than 297mm (11.7”)
ADG025S