8
Rev 20A
Motor Installation:
Before you start
•
The GTR064 Sliding Gate Automatic kit is suitable for powering the opening and
closing motion of gates up to 1000kg in weight, and up to a length of 8m.
•
Gate motion is achieved by the rotating cog of the gate motor driving the gear rack fitted to
the moving gate (sold separately).
•
The gate motor requires you to press the remote control once to open, and once again to
close. This is a safety feature to ensure safe operation.
•
The gate motor itself must be fitted within private property, never externally to a
property’s boundary.
•
This premium motor has a range of optional accessories which can be added, such as solar
power, battery backup, infrared photocells, exit wands, and warning light.
Power Supply: The GTR064 requires 1 x 10Amp
AC240V 50Hz power supply (RCD Protected
Weatherproof PowerPoint). The GTR064 comes complete with a power lead and plug that is 1m long. If
you do not have a suitable RCD protected weatherproof power point within 1m of the gate motor you will
need to consult a licenced electrician .
Any works done to the motor must be completed whilst the power is off and the motor is
unplugged.
Any modifications/alterations/works to the 240V AC power components must only be
completed by a licensed electrician for your state/country.
Please Note:
Your weatherproof power outlet should be no more than 1m from the electric gate motor.
If your weatherproof power outlet is more than 1m from the gate motor, you will require a
licensed electrician to fit a new power cable.
Any excess cable length should be cable tied and secured out of the way of moving objects.
