Rice Lake IQ9500, Руководство по установке

Страница: 40 / 48

RS-232 Specification 37
When bit 3 (
Output Normally Entered Data
) is 1, bit 2 (
Weight Stable
) should be ignored. Table 8-14 shows the
printer setup configuration with title descriptors and data lengths.
8.9 Bar Code Scanner
Bar code scanning capabilities are available using
either a laser scanner or a wand (or pen) scanner. The
laser scanner allows non-contact, instantaneous, and
accurate input of unit weight, tare weight, and ID
code.
The scanner can become operational by connecting
the scanner cable to the circular DIN connector in the
rear of the scale keyboard. The pen reader is an
economical method to use the accuracy and speed of
bar code data input when contact scanning is
available. Be sure to verify the correct settings on
Specifications 14 and 15 (see
Section 5.1.1
).
8.10 Intput Data Format
The IQ9500 provides two methods to input data; one
is with a header and the other, without a header. The
format using a header is shown in the diagram below.
The format for without a header is shown below
(identified as an ID code).
8.11 Three Lines Bar Code
The IQ9500 can read three lines of bar code. The
following illustrations show the configuration for
Lines 1, 2, and 3.
Line 1:
Line 2:
Line 3:
Communication available in the operation mode
include, unit weight, tare weight, part code, and
quantity.
Communication available in program mode include,
part code, part number, part name, inventory, unit
weight, tare weight and setpoints.
8.12 Header
Table 8-15 presents the type of receivable header code
including ASCII code number and data description.
Title or Descriptor
Data Lengths,
digits
PART NUMBER 16
INVENTORY 8
PART NAME 20
SCALE NUMBER 1
DATE AND TIME
Header
(C)
Year
(two digits)
Month
(two digits)
Day
(two digits)
Hour
(two digits)
Minute
(two digits)
Second
(two digits)
CR
Table 8-14. Printer Setup with Descriptors and Data Lengths
Header Data CR
Data CR
Header SP Data 1 CR
SP Data 2 CR
Data 3 CR
Header Code ASCII Code Data Header Code ASCII Code Data
1 31 Unit Weight I 49 Total Quantity
2 32 Quantity K 4B Inventory
3 33 ID Code M 4D Part Number
4 34 Tare Weight N 4E Part Name
A 41 Gross Weight Q 51 Setpoint 3
F 46 Setpoint 1 (W) X 58 Setpoint 4
G 47 Setpoint 1 (Q) U 55 Setpoint 5
H 48 Setpoint 2 O 4F Setpoint 6
Table 8-15. Receivable Header Code