RHEONIK Messgeräte GmbH
REV. I, Apr. 2004
.
Operation Manual RHE 07, 08, 11
Page
14
To modify numbers, press
+
or
-
buttons to increment or decrement the displayed numbers.
Use
Next
on the right to enter the next menu point. Following the
Next
–function, you will be guided
back into the initial measurement data display.
MASS FLOW TRANSMITTER
+ - Next
20mA= 130.0 g/min
decrement
number
increment
number
step to
next Menu
example
For a complete overview of the menu,please have a look at the menu flow chart in appendix.
2.1.3. Basic functions
This section gives a short description of all functions needed to setup all inputs and outputs according
to individual requirements.
2.1.3.1. Zero calibration
Zero calibration should be carried out when:
•
the meter has been newly installed.
•
drastic piping or fluid changes have occurred.
•
meter operating temperature has changed considerably.
