Rheavendors Group Cino XS Grande Pro VHO, Руководство по установке и обслуживанию

Страница: 33 / 51

n. N off NN
hh:mm dd-mm-yyyy
PRODUCT QTY N
[ 0.0] 170.0
PROD. N WARNING
THRESOLD: 17.0
ABIL. STOP PROD. N
1=stop 0
SET PRODUCT
=====OK=====
DEC. COF. GROUNDS
[ 00] 00
DEC. GROUP CAFE
[ 00] 00
WATER FILTER CNT
[ 00] 00
COIN A N
with card 0=acc.
COIN A N
no card 0=acc.
MAX CREDIT CARD
0.00
Cino XS grande PRO VHO by
MAN2100154 rel. 00 dated 04.11.2013 page no. 33 of 51 pages
www.rheavendors.com tel: 0039 02 966 551 fax: 0039 02 96 55 086 e mail: rheavendors@rheavendors.com
exclusive property of rheavendors group
09.01.m. out of service
09.01.n. product qty
09.01.o. maintenance
09.01.p. rfid card
it displays the twenty errors last occurred and recorded for the
machine; press key “ 2 ” to scroll records and press key “ 4 ” to reset
them (see 11.);
the grinder and each product motor may be assigned a time credit
in seconds that will be decreased whenever that product is
dispensed; when the credit is used up, upon the request for a
dispensing cycle including that product, the machine will answer
<< selection not available >>; this control is originally disabled
and the machine has no constraint of any kind; to programme the
credit time of a product motor, just set up the variable by pressing
keys “ 4 ” and “ 5 ” ;
after reaching the time quantity you wish, press key “PROG” ; the
value will be copied between parentheses on the left of the display;
“C” corresponds to the coffee beans canister;
quit programming as usual;
you can programme the first limit threshold, beyond which the
display will show an alarm message without interfering with the
machine operation;
you may also decide whether to inhibit or not the dispensing cycle
of the selections including that product as soon as the time credit is
used up;
after filling the canister, the operator who can not access the
programming mode - because for e.g. he is not aware of the
password - may restore the decounter to its original values by
pressing the "PROG" button for ca. 10-15 seconds until the display
shows:
in this ensemble of parameters, “key 2 ”, you can set some counters
to trigger an alarm after a programmable number of events (press
“ 4 ” and “ 5 ” to set and press key PROG to store):
- dispensing cycles before having to replace the cartridge of the
external filter; when 500 dispensing cycles are left, the display
will show “replace the water filter” and as soon as the decounter
reaches 0, it will show “water filter out of service”, thus inhibiting
the machine operation;
- espresso dispensing cycles before having to service the coffee
brewer; when 5 dispensing cycles are left, the display will show
“ wash the coffee brewer" and as soon as the decounter reaches
0, it will show “coffee brewer washing out of service”, thus
inhibiting the machine operation;
- espresso dispensing cycles before having to empty the grounds
base drawer (see 13.04.); as soon as the decounter reaches 5,
the message “empty the coffee grounds" will appear; as soon as
the counter reaches zero, the machine operation will be inhibited
and the display will show "coffee grounds out of service" ;
- the maximum loadable credit of the RFID card;
- 0 for each coin (from A to J) that can be accepted when the RFID
card is made available;
- 0 for each coin (from A to J) that can be accepted when the RFID
card is not made available;