Rheavendors Group Cino XS Grande Pro VHO, Руководство по установке и обслуживанию

Страница: 28 / 51

MIXER N
0= inhib. 60.0
START DELAY
MIXER N 3.0
MIXER SPEED N
LOW
LATTE-MACCHIATO
START BREWER 0.0
PRODUCT LM
0= inhib. 0.0
START DELAY
PRODUCT LM 0.0
BREAKS NUMBER
0-1-2 00
WATER LM TIME
0= inhib. 0.0
START WATER DELAY LM
0 = inhib. 0.0
MIXER LM
0= disab. 0.0
START DELAY
MIXER LM 0.0
MIXER LM SPEED
HIGH
PRODUCT
MILK LM n: N
LM MILK WATER
NUMBER= 0
SELECTION NAME N
------- n:00
JUG
0=no n:00
selection name N
WATER ON DEMAND
(*)
se ≠0
Cino XS grande PRO VHO by
MAN2100154 rel. 00 dated 04.11.2013 page no. 28 of 51 pages
www.rheavendors.com tel: 0039 02 966 551 fax: 0039 02 96 55 086 e mail: rheavendors@rheavendors.com
exclusive property of rheavendors group
LM dispensing
LM dispensing
LM dispensing
LM dispensing
LM dispensing
LM dispensing
LM dispensing
LM dispensing
LM dispensing
LM dispensing
LM dispensing
(*)
Cappuccino
Black coffee
LATTE MACCHIATO
White coffee
Espresso
Milky espresso
moccaCino
Chocolate
Choco-milk
Hot water
Drink
Cafe au lait
White coffee
Tea
Soup
Strong tea
Black tea
White tea
WATER ON DEMAND
custom
the rotation time of the mixer fan may be changed by pressing
keys “ 4 ” and “ 5 ” ; if time is set to zero, the mixer will not rotate;
you can carry out a "time test" on the set-up value; (see 13.17.);
if the rotation time is other than zero, the mixer fan will be rotated
with this delay;
the mixer rotation speed can be regulated between slow, medium,
quick by pressing keys “ 4 ” and “ 5 ” ;
if “Latte macchiato” is selected, it establishes the delay between
the second milk and the espresso dispensing cycle;
it establishes the milk quantity of the second dispensing cycle;
it determines the delay of the second milk dispensing cycle;
it determines the interruptions of the second milk dispensing cycle;
it establishes the water quantity of the second milk dispensing
cycle;
it determines the delay of the water quantity of the second milk
dispensing cycle;
it establishes the mixer rotation time of the second milk dispensing
cycle
if other than zero, it delays the mixer power-on by the set-up time;
it determines the mixer rotation speed of the second milk
dispensing cycle;
it tells the machine which product canister shall be used for the
milk dispensing cycle;
it establishes which water shall be used for the second milk
dispensing cycle;
to produce drinks in a large volume (JUG), to repeat the selection
for N times automatically;
press “ 4 ” and “ 5 ” to select the drink name that will appear during
the dispensing cycle; options are listed here below:
- “standard”, the display will show “drink N is being prepared” ;
- “ list of names” of drinks stored in the machine memory; the
display will show “ drink name is being prepared” ;
- “WATER ON DEMAND” :
if this option is enabled, the machine may dispense water in
continuous mode until the selected key is released;
programme the instant solenoid valve (from 1 to 3) from which
to dispense water and set up a time other than 0 (e.g. 1.0) by
pressing keys “ 4 ” and “ 5 ” ;
all the other key parameters shall be set to 0;
- “custom” : the display will show the names customised by the
user; create a configuration file with rheAction (see 05.39.) and
upload it on the machine by means of a flash key (see 09.06.);