37.b
37.c
Cino XS grande PRO VHO
by
MAN2100154 rel. 00 dated 04.11.2013 page no. 18 of 51 pages
www.rheavendors.com tel: 0039 02 966 551 fax: 0039 02 96 55 086 e mail: [email protected]
exclusive property of rheavendors group
05.37. electronics
05.37.a. CPU
05.37.b. display board
05.37.c. flash board
the CPU board governs the machine operation, it is the place where
machine programmes are located and it is secured to the frame by
means of four turrets;
the phone cable provides for connection with the flash key seat
(see 05.15. and 05.37.c.) whereas the display cable can provide for
the signal exchange with the keyboard and the display in the door
(see 05.03. and 05.04.); the temperature probe cable is separated
from the machine wiring so as not to hinder the removal of the
probe;
the five leds are intended to display the machine status;
the display board secured inside the door receives the signals from
the selection keyboard (consisting of two separate modules of five
keys each) and it displays the messages produced by the CPU it is
connected with by means of a flat cable;
the internal programming button is installed on the printed circuit
of this board;
arranged inside the door, beneath the orange carter (see 05.15.), it
provides for the insertion of the flash key for machine
programming (see 09.06.);
temperature probe
connector
display board connector
RFID connector
MDB connector
executive connector
DL2 - led 5 V dc
USB port
DL1 - led 24 V dc
DL4 - espresso pump
led
pressure boiler
heating element
IN 230 V ac
grinder motor connector
DL3 - led 5 V CPU
grinder motor 2A fuse
to the keyboard
to the keyboard
to the CPU
to the flash board
label lighting
label lighting
door lighting
DL5 - led pressure
boiler heating element
name
colour
description
DL1
red
+ 24 V main
DL2
green
+ 5 V power supply
DL3
red
+ 5 V main
DL4
green
espresso pump
DL5
red
pressure boiler heating element
