Rheavendors Group Cino XS Grande Pro VHO, Руководство по установке и обслуживанию

Страница: 27 / 51

COFFEE WATER
0= INHIB. cc: 00
COFFEE SEQUENCE
1=COF. BEFORE N
FUNCTIONING
INHIBITED
PROGRAMMING:
TOTAL
PROGRAMMING:
PARTIAL
PRODUCT N
0= INHIB. 0.0
STEP DOWN BREWER
mm: 00
GRINDER TIME
0.0
T. AFTER PREINF.
0=NO SEC . 00
WATER N TIME
0= INHIB. 0.0
START DELAY
WATER N 0.0
BREAKS NUMBER
0-1-2 00
START DELAY
PRODUCT N 0.0
(*) LATTE MACCHIATO
START BREWER 0.0
(*) PRODUCT LM
0=INHIB. 0.0
se ≠0
se ≠0
PROGRAMMING
BUTTON N
Cino XS grande PRO VHO by
MAN2100154 rel. 00 dated 04.11.2013 page no. 27 of 51 pages
www.rheavendors.com tel: 0039 02 966 551 fax: 0039 02 96 55 086 e mail: rheavendors@rheavendors.com
exclusive property of rheavendors group
09.01.a. button 1 ÷ 10 when the display shows “key n”, press key “ 2 ” to scroll (by
pressing “ 4 ” and “ 5 ”) the variables composing the function of that
key;
- if you press “ 2 ” when “ENABLED”, the key will fulfil the function
for which it is programmed (dispensing of one drink); see
paragraph “enabled” ;
- if you press “ 2 ” when “NOT ENABLED”, the key will be inhibited
and no function will be fulfilled;
press key “ 2 ” to scroll the following items:
choose the “extended” option to display all variables; choose
"reduced" to only display the parameters with values other than
zero (press keys “ 4 ” and “ 5 ” to vary the option);
the first programmable product for each selection key is espresso
coffee; there are three variables:
- the water quantity in the cup; change it with “ 4 ” and “ 5 ” ; if the
variable is zero, no espresso will be dispensed (drink consisting of
instant products only);
- coffee will be dispensed before (value 1) or after (value 0) instant
products;
- it establishes the re-opening value of the coffee brewer chamber
after compressing ground coffee and before activating the pump for
coffee percolation;
scroll by pressing “ 2 ”, the display will show:
press key “ 4 ” and “ 5 ” to vary the motor rotation time of the N
product, thus modifying the product quantity dispensed; if the time
is zero, the N product is not dispensed; you can carry out a "time
test" on the set-up value; (see 13.17.);
if programmed with a time other than zero, the N product motor
will be activated with the delay programmed herein; the delay time
is increased or decreased by pressing keys “ 4 ” and “ 5 ” ;
the rotation time of the product motor can be briefly interrupted
once or twice during the dispensing cycle (0 = no interruption);
(also see 13.16.);
it establishes how long the coffee beans grinder motor will be
activated, thus determining the ground quantity that will be poured
into the coffee brewer;
if this option is enabled, after compressing the ground dose, the
pump delivers a small water quantity to make it wet, it stops and
resumes the usual dispensing cycle;
it determines the opening time of the instant solenoid valve and,
therefore the water quantity dispensed; you can carry out a "time
test" on the set-up value; (see 13.17.);
the water into the mixing bowl will be dispensed with the delay
programmed herein;
(*) the functions concerning the regulation parameters of the "latte
macchiato" drink are not included in this list since they have been
grouped into the items: LM dispensing;