REXROTH Sytronix FcP 5020, Руководство по эксплуатации

Страница: 198 / 204

14.5 Sytronix Warning Code
Panel
display
Function
code
Error information Reason Solution
APF1 d0.88
0: No warning - -
1: Pressure feedback
exceed limit
1. Excessive pressure setting
2. Pressure transducer failure
1. Set pressure to a lower value
2. Check if the wiring is properly con‐
nected for pressure feedback trans‐
mission
2: Pressure command
exceed limit
Pressure command upon user’s in‐
put exceeding [F4.22]
Set pressure to a lower value
3: Flow command ex‐
ceed limit
Flow command upon user’s input
exceeding [F4.24]
Set flow to a lower value
4: Oil filter warning Oil filter almost full Clean or replace filter
5: Oil level warning Oil level too low Refill oil
6: Oil temperature
warning
Oil temperature reached
Reduce hydraulic loses or enhance oil
cooling
7: Oil change warning Operation time exceeds oil life time Change oil and reset operation timer
(F4.54)
8: (Reserved) - -
9: Pump thermal pro‐
tection warning
Pump speed is lower than required
for pump cooling (F4.36)
Increase system minimum speed
10: Pump power limi‐
tation warning
Required pump power exceeds lim‐
itation set in F4.35
Adjust limitation or system load
Tab. 14-2: Warning code
Bosch Rexroth AG DOK-SYTROX-FCP5020****-IT01-EN-P 196/201
Frequency-controlled pump drive system Sytronix FcP 5020
Troubleshooting