REXROTH Sytronix FcP 5020, Руководство по эксплуатации, Страница: 115 / 204

Actual pressure monitoring function works all the time, no matter
when drive is in operation or standby.
7.5.5 Oil Change Warning / Error Function
Code Name Setting range Default Min. Attri.
F4.00 Protection function control word
0...15
Bit0: Pressure sensor failure (PSF)
Bit1: Actual pressure monitoring
Bit2: p/Q max. command limit
Bit3: Oil changing detection
0 - Run
F4.51 Warning hours of oil change 0...60,000 hours 36,000 1 Run
F4.52 Error hours of oil change 0...60,000 hours 40,000 1 Run
F4.53 Oil in operation time - - - Read
F4.54 Reset oil in operation time 0...1 0 - Run
Tab. 7-25: Parameter list of oil change warning / error function
Oil change monitoring function can be activated by Bit3 of F4.00.
Oil operation time will be counted and saved in F4.53 when RUN command
has been set, no matter if the oil change monitoring function is active or not.
And also decimal part of this counter will be set to 0 after power recycle.
If this time exceeds warning or error level in [F4.51] or [F4.52], warning or
error signal will be generated when the monitoring function is active. Parame‐
ter F4.54 = 1 is used to reset the oil operation time F4.53.
DOK-SYTROX-FCP5020****-IT01-EN-P Bosch Rexroth AG 113/201
Frequency-controlled pump drive system Sytronix FcP 5020
Commissioning of Sytronix FcP 5020 System