REXROTH Sytronix FcP 5020, Руководство по эксплуатации

Страница: 156 / 204

Setting range of E1.00...E1.03 (0...41), E1.04 (0...47):
0: Inactive
1: Multi-speed control input 1
2: Multi-speed control input 2
3: Multi-speed control input 3
4: Multi-speed control input 4
10: Acceleration / deceleration time 1 activation
11: Acceleration / deceleration time 2 activation
12: Acceleration / deceleration time 3 activation
15: Freewheeling stop activation
16: Stop DC-braking activation
20: Frequency Up command
21: Frequency Down command
22: Up / Down command reset
23: Torque / speed control switch
25: 3-wire control
26: Simple PLC stop
27: Simple PLC pause
30: Second frequency setting source activation
31: Second run command source activation
32: Error signal N.O. contact input
33: Error signal N.C. contact input
34: Error reset
35: Forward running (FWD)
36: Reverse running (REV)
37: Forward jog
38: Reverse jog
39: Counter input
40: Counter reset
41: PID deactivation
46: User parameter set selection
47: Pulse input mode activation
Setting range of E1.15:
0: 2-wire forward / stop, reverse / stop
1: 2-wire forward / reverse, run / stop
2: 3-wire control mode 1
3: 3-wire control mode 2
4: 1-wire control
Setting range of E1.68:
0: Curve1 for AI1, curve1 for AI2, curve1 for pulse input
1: Curve2 for AI1, curve1 for AI2, curve1 for pulse input
2: Curve1 for AI1, curve2 for AI2, curve1 for pulse input
Bosch Rexroth AG DOK-SYTROX-FCP5020****-IT01-EN-P 154/201
Frequency-controlled pump drive system Sytronix FcP 5020
Commissioning of Sytronix FcP 5020 System