REXROTH Sytronix FcP 5020, Руководство по эксплуатации

Страница: 141 / 204

Code Name Setting range Default Min. Attri.
F4.29 Pump logic selection
0: Positive
1: Negative
0 - Stop
F4.30 Pump Vg1 0...1,000 ccm 0 1 Stop
F4.31 Pump Vg2 0...1,000 ccm 0 1 Stop
F4.32 Upper pressure difference switching
threshold
0.0...350.0 bar 15.0 0.1 Stop
F4.33 Lower pressure difference switching
threshold
0.0...350.0 bar 10.0 0.1 Stop
F4.34 Speed switching threshold adjustment 0.1...1.0 0.9 0.1 Stop
F4.35 Pump power 0.00...315.00 kW 0.00 0.01 Stop
F4.36 Pump thermal protection speed 0…5,000 rpm 500 1 Stop
F4.37 Pump thermal protection time constant 0…6,000 s 0 1 Stop
F4.39 Master / slave switch source
0: Depend on the value of F4.03
1: Digital input
2: Communication
0 - Stop
F4.40 Slave pump speed command lower limit -5,000...5,000 rpm 0 1 Run
F4.41 Master / slave pump mode switch delay 0...500 ms 100 1 Stop
F4.45 Pressure boost for drop compensation 0.0...1,000.0 bar 0 0.1 Run
F4.46 Pressure reduce for overshoot compen‐
sation
-1,000.0...0.0 bar 0 0.1 Run
F4.50 Oil filter warning / error delay time 0...1,000 s 60 1 Run
F4.51 Warning hours of oil change 0...60,000 hours 36,000 1 Run
F4.52 Error hours of oil change 0...60,000 hours 40,000 1 Run
F4.53 Oil in operation time 0...60,000 hours 0 - Read
F4.54 Reset oil in operation time 0...1 0 1 Run
F4.70 Drive start level via AI (for myCro) 0.0...20.0 V, mA 14.2 0.1 Run
F4.71 Drive stop level via AI (for myCro) 0.0...20.0 V, mA 10.4 0.1 Run
F4.72 Oxygen too high warning level 0.0...20.0 V, mA 15.5 0.1 Run
F4.73 Oxygen too high warning delay 0.0...100.0 hours 4.0 0.1 Run
F4.74 Pressure too low warning level 0.0...300.0 bar 100.0 0.1 Run
F4.75 Pressure too low warning delay 0.0...100.0 s 60.0 0.1 Run
Tab. 7-41: Parameter list of group F4
DOK-SYTROX-FCP5020****-IT01-EN-P Bosch Rexroth AG 139/201
Frequency-controlled pump drive system Sytronix FcP 5020
Commissioning of Sytronix FcP 5020 System