REXROTH Sytronix FcP 5020, Руководство по эксплуатации

Страница: 122 / 204

Code Name Setting range
FcP
default
myCro
default
F2.10 Pressure sensor type
0: Others
1: HM20-2X/10-C
2: HM20-2X/50-C
3: HM20-2X/100-C
4: HM20-2X/160-C
5: HM20-2X/250-C
6: HM20-2X/315-C
7: HM20-2X/400-C
8: HM20-2X/630-C
9: Other 4...20 mA pressure sensor
10: Reserved
11: HM20-2X/10-H
12: HM20-2X/50-H
13: HM20-2X/100-H
14: HM20-2X/160-H
15: HM20-2X/250-H
16: HM20-2X/315-H
17: HM20-2X/400-H
18: HM20-2X/630-H
19: Other 0...10 V pressure sensor
3 5
F2.16...F2
.24
Digital input
0...21: See chapter 7.10.3 "Group F2:
Input and Output Parameter" on page
134
22: Drive enable for myCro
0
F2.16 = 22,
others = 0
F2.36 DO1 output 0: No function assigned from ASF
1: Converter warning
2: Green CytroPac flashing LED
3: Red CytroPac flashing LED
4: Oxygen too high (for myCro)
5: Pressure too low (for myCro) 1 4
F2.37 EDO output 0 5
F3.12 Proportional gain [0] 0.00...500.00 rpm/bar 8.00 2.00
F3.13 Integral time 1 [0] 0...999 ms 80 200
F3.16 Differential gain [0] 0.000...10.000 (rpm/bar)*s 0.000 0.000
F3.19 System minimum speed [0] -5,000...5,000 rpm 0 500
F3.32 Proportional gain [1] 0.00...500.00 rpm/bar 8.00 2.00
F3.33 Integral time 1 [1] 0...999 ms 80 200
F3.36 Differential gain [1] 0.000...10.000 (rpm/bar)*s 0.000 0.000
F3.39 System minimum speed [1] -5,000...5,000 rpm 0 500
Bosch Rexroth AG DOK-SYTROX-FCP5020****-IT01-EN-P 120/201
Frequency-controlled pump drive system Sytronix FcP 5020
Commissioning of Sytronix FcP 5020 System