REXROTH Sytronix FcP 5020, Руководство по эксплуатации

Страница: 102 / 204

Code Name Setting range Default Min. Attri.
F1.11 Flow command source
0: Depend on the value of F1.12
1: Analog input (positive / negative)
2: Communication
0 - Stop
F2.08
Flow command corresponding to
10V or 20mA
1...5,000 rpm 400 1 Stop
F2.09
Flow command null offset in V or
mA
0.0...5.0 V, mA 0.0 0.1 Stop
F2.31
AO1 output
(use E2.27 for gain) 0: No function assigned from ASF
1: Pressure command (scaled by F2.04)
2: Pressure feedback (scaled by F2.06)
3: Setting speed (include direction)
(scaled by F2.08)
4: Output speed (include direction)
(scaled by F2.08)
0 - Run
F2.32
EAO output
(use H8.27 for gain)
0 - Run
F3.03 Filter time for flow command 0...999 ms 4 1 Run
F4.03 Pump function control word
0...31
Bit0: Pump power limit
Bit1: Pump thermal protection
Bit2: Switch master to slave
Bit3: Two points / double pump
Bit4: Pressure drop / overshoot compen‐
sation
0 - Run
F4.20 p/Q command soft start delay 0.0...1,000.0 s 0.0 0.1 Stop
F4.24 Maximum flow command limit [F4.23]...5,000 rpm 3,000 1 Stop
F4.39 Master / slave switch source
0: Depend on the value of F4.03
1: Digital input
2: Communication
0 - Stop
F4.40
Slave pump speed command lower
limit
-5,000…5,000 rpm 0 1 Run
F4.41
Master / slave pump mode switch
delay
0…500 ms 100 1 Stop
Tab. 7-17: Parameter list of master / slave function
Fig. 7-28: Master / slave control function
Bosch Rexroth AG DOK-SYTROX-FCP5020****-IT01-EN-P 100/201
Frequency-controlled pump drive system Sytronix FcP 5020
Commissioning of Sytronix FcP 5020 System