Revolabs 10-FLX2-002-VOIP Скачать руководство пользователя страница 82 | Manualshive

Страница: 82 / 100

background image

Dialer Low Battery

When the Dialer experiences a low battery it will display a ‘low battery’ notification on
the screen. The Dialer should be returned to the charger until the battery status on the
home screen shows a full charge.

Dialer Link Lost

If the FLX Dialer loses connection to the FLX2 Base Station it will display a ‘connection
lost’ notification on the screen and starts emitting a warning sound. The Dialer should
be moved back into range of the Base Station at which point it will reconnect
automatically.

Base Power Lost

If the FLX2 Base Station loses power, it will disconnect all telephone calls, analog
audio inputs/outputs and will disconnect from the FLX Dialer, Speaker, and
Microphones. Check to make sure that the network connector is still connected to the
FLX2 Base Station. Once the FLX2 Base Station is powered back on, the Dialer,
Speaker and Microphones will reconnect automatically.

Microphone, Speaker, or Dialer not connecting to Base Station

If any of the components of the FLX2 Conference Phone indicate that they are
searching for the Base Station, or lost the connection to the Base Station, please follow
these steps:

1.

Is the Base Station powered up – the Status LED on the back of the Base Station

should have green double flashes about every second. If not, please power up

the Base Station. All components should automatically connect to the Base

Station after a few seconds.

2.

The Base Station is powered up, but the Status LED indicates a fault has

happened by missing every fifth green double flash. Power down and power up

the Base Station. All components should reconnect to the Base Station after a

few seconds. The fault message in the Base Station will continue (every fifth

double flash is skipped) – this just shows that a fault has happened in the past

and can be ignored. If the components still do not connect to the base please

contact

Yamaha Unified Communications

Support.

3.

Are the Dialer, Microphone, and Speaker out of reach of the Base Station?
Please bring the components closer to the Base Station to see whether this

resolves the issue.

4.

Power down the Base Station, the Microphones, the Dialer, and the Speaker.

Now power up the Base Station. Once the Base Station is powered up (double

green flashes of the Status LED), power up the Dialer, and then the Microphones

and the Speaker. The components should now connect to the Base Station.

5.

If the components still do not connect to the Base Station, please re-pair the

components that have not connected to the Base Station, beginning with the

Dialer. Pair of components to the Base Station is explained on page 42.

6.

If the components still do not connect to the Base Station, please contact

Yamaha Unified Communications

support.

82

«
...
80
81
82
83
84
...
»

Содержание 10-FLX2-002-VOIP





































































































Отзывы:

Нет отзывов

Похожие инструкции для 10-FLX2-002-VOIP

Бренд: Xtrons Страницы: 30

Бренд: WEST Страницы: 2

Medialon MAS Pro Dante D

Бренд: 7th Sense Страницы: 2

SoundStation 1725-30955-001

Бренд: Polycom Страницы: 2

Бренд: Daewoo Страницы: 21

STAGE-4 ROKKER XXR Custom

Бренд: J&M Corporation Страницы: 5

Бренд: Velux Страницы: 24

Бренд: GROM Audio Страницы: 16

Бренд: Powrmatic Страницы: 36

Listening System PLS-900

Бренд: Listen Страницы: 2

Auto Sentry Petro

Бренд: ICS Страницы: 42

Бренд: Polycom Страницы: 2

Бренд: Yaesu Страницы: 39

Бренд: Kenwood Страницы: 24

Бренд: Kenwood Страницы: 21

Бренд: Kenwood Страницы: 28

KMR-700U - Radio / Digital Player

Бренд: Kenwood Страницы: 35

Бренд: Kenwood Страницы: 17

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды