Revolabs 10-FLX2-002-VOIP Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 100

background image

of the Speaker until you hear the Speaker shut-off or the LEDs turn off.

2. Ensure that the Base Station is plugged in and powered up.
3. On the Dialer, browse to the Pairing menu: Menu



Setup



Advanced Setup



Pairing.

4. Select SPK 1 (Speaker 1) and press the ‘Enter’ or ‘Pair’ key to enter pairing

state.

5. The screen will display ‘Pairing Speaker 1’.
6. Press and hold the button on the bottom of the Speaker until the LED turns solid

red. The speaker is now in pairing mode.

7. After a short time an overlay will appear on the FLX Dialer saying ‘Pairing

Successful’, after which the screen should read ‘SPK 1 Linked’.

8. If pairing was unsuccessful, the Speaker will show an alternating red -green slow

blinking sequence indicating that the pairing failed. The Dialer will display a
‘Pairing Timeout’ message. In that case the pairing procedure should be
repeated.

Microphone

1. To pair a Microphone, turn off the Microphone by holding the mute button until

the LED turns red if it is not already turned off.

2. Ensure that the Base Station is plugged in and powered up.
3. On the Dialer, browse to the Pairing menu: Menu



Setup



Advanced Setup



Pairing.

4. Select MIC 1 (Microphone 1) or MIC 2 (Microphone 2) and press the ‘Enter’ key

to enter pairing state.

5. The screen will display ‘Pairing Mic 1’ or ‘Pairing Mic 2’ depending on which

Microphone you are pairing.

6. Press the mute button on the Microphone and hold it until the LED turns solid

red. The Microphone is now in pairing mode.

7. After a short time an overlay will appear on the Dialer ‘Pairing Successful’, after

that the screen should read ‘MIC 1 Linked’ or ‘MIC 2 Linked’, based on which one
you were pairing.

9. If pairing was unsuccessful, the Microphone will show an alternating red - green

slow blink sequence, indicating that the pairing failed. The Dialer will display a
‘Pairing Timeout’ message. In that case the pairing procedure should be
repeated.

LED Pairing Indicators:

Speaker Indicator

Status

Steady Red

Speaker is in Pairing Mode, either waiting or pairing in progress

Slow red- green flash

Pairing failed or timed out

Green flash

Pairing successful

Microphone Indicator

Status

Steady Red

Pairing Mode, either waiting or pairing in progress

Slow red – green flash

Pairing failed or timed out

Green flash

Pairing successful

48

«
...
46
47
48
49
50
...
»

Содержание 10-FLX2-002-VOIP





































































































Отзывы:

Нет отзывов

Похожие инструкции для 10-FLX2-002-VOIP

Бренд: Panasonic Страницы: 104

Бренд: Panasonic Страницы: 32

Бренд: SAI Страницы: 16

Mobile Multimedia AM/FM/DVD Receiver VM9311

Бренд: Jensen Страницы: 90

Бренд: SainSmart Страницы: 49

EduTrainer 8071407

Бренд: Festo Страницы: 80

Бренд: Roadstar Страницы: 23

Бренд: ION Страницы: 16

Бренд: Balboa Instruments Страницы: 76

Бренд: Revo Страницы: 6

Бренд: Plank Digital Audio Страницы: 25

Бренд: AAD Страницы: 8

Бренд: Kenwood Страницы: 17

Бренд: Kenwood Страницы: 2

Бренд: Kenwood Страницы: 12

Бренд: Kenwood Страницы: 68

Бренд: Kenwood Страницы: 28

Бренд: Kenwood Страницы: 52

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды