Revolabs 10-FLX2-002-VOIP Скачать руководство пользователя страница 75 | Manualshive

Страница: 75 / 100

background image

Call Status

The Call Status page displays summary call statistics while in an active call. If there is
no active call, the page will show a “No active call” message. If in a call, the page will
show stats similar to those below. Click the Refresh button to manually refresh the
page. The page does not update automatically. You can select, copy and paste the
stats into a file or email them if desired.

Sample Call Status

  [CONFIRMED] To: "4002" <sip:[email protected]>;tag=as7ba338fa
  Call time: 00h:00m:25s, 1st res in 2600 ms, conn in 2670ms
  SRTP status: Not active Crypto-suite:
  #0 G722 @16KHz, sendrecv, peer=10.134.122.95:13400
RX pt=9, stat last update: 00h:00m:05.390s ago

total 1.1Kpkt 179.3KB (224.2KB +IP hdr) @avg=57.1Kbps/71.4Kbps
pkt loss=0 (0.0%), discrd=0 (0.0%), dup=0 (0.0%), reord=0 (0.0%)

(msec) min avg max last dev

loss period: 0.000 0.000 0.000 0.000 0.000
jitter : 0.000 2.004 14.625 2.625 2.186

TX pt=9, ptime=20ms, stat last update: 00h:00m:00.110s ago

total 1.2Kpkt 200.6KB (250.8KB +IP hdr) @avg 63.8Kbps/79.8Kbps
pkt loss=0 (0.0%), dup=0 (0.0%), reorder=0 (0.0%)

(msec) min avg max last dev

loss period: 0.000 0.000 0.000 0.000 0.000
jitter : 0.375 3.925 15.000 15.000 5.570

RTT msec : 0.000 1.810 5.020 2.014 1.840

Power On/Off the System Components

During normal use and operation of the FLX2 System, there is no need to turn off any
part of the system. However, if the system is going to be stored without the Charger
Base powered on, then each component should be powered off until further use.

Dialer On/Off

To power off the FLX Dialer, hold down the red ‘end call’ soft key until the device asks
whether you want to shut it down. Confirm this by pressing ‘Yes’.

To turn the Dialer back on, either:

1. Hold down the red ‘end call’ soft key until the Dialer powers on.

OR

2. Simply return the Dialer to an active Charger Base and it will power on

automatically.

Speaker On/Off

To power off the FLX Speaker, hold down the button located on the bottom of the
Speaker until the LED indicators on the top of the Speaker turn solid red. Once the LED
indicators are solid red, release the button and the Speaker will power off.

75

«
...
73
74
75
76
77
...
»

Содержание 10-FLX2-002-VOIP





































































































Отзывы:

Нет отзывов

Похожие инструкции для 10-FLX2-002-VOIP

Бренд: Samsung Страницы: 22

ECL Comfort 110

Бренд: Danfoss Страницы: 8

Бренд: Danfoss Страницы: 16

IX Room Systems XT4 00 Series

Бренд: Avaya Страницы: 90

Бренд: Daewoo Страницы: 35

Бренд: Autotrol Страницы: 8

Бренд: Bose Страницы: 2

Бренд: ALLEN & HEATH Страницы: 14

Scopia XT5000 Series

Бренд: RADVision Страницы: 55

Бренд: Cary Audio Design Страницы: 41

PressureMAT PMAT2

Бренд: PendoTECH Страницы: 48

Бренд: Vents Страницы: 20

Бренд: FAAC Страницы: 16

Бренд: Marshall Amplification Страницы: 30

Бренд: JiangYi Страницы: 13

Бренд: LOGICDATA Страницы: 32

MusicCast 200 TSX-N237

Бренд: Yamaha Страницы: 44

MEISTERSTUCK SO-610

Бренд: Sonoro Страницы: 334

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды