Retsch ZM 300, Руководство пользователя

Страница: 57 / 93

Controlling the device using the touchscreen display
57
7.5.2 Stop Process
Grinding is not stopped automatically (except when a DR 100 feed unit is connected and the
auto stop function is selected) and must be actively stopped by pressing the stop button.

Press the button to stop grinding.
The hood is unlocked automatically after grinding has stopped if the "Automatic
opening" function (T8) is activated in the service menu.
7.6 Programme Mode
If sample materials are frequently ground with the same parameters, these parameters can be
stored in the program preset and called as Standard Operating Procedures (SOP) when
required.
Eight program presets are available.
The following parameters can be stored in individual programs:
•
Speed in rpm.
•
Delayed start in mm:ss
•
Feed rate of the DR 100 feed unit in %
•
Automatic stop in mm:ss
In programme mode, the parameters can only be changed if editing is activated by pressing
.

Press the section of the parameter to be edited. The background of the control element is
greyed out and the background of the control dial lights up in blue.

Turn the control dial until the desired value is displayed.
The set value is applied as soon as the section of the parameter is pressed again or another
parameter is selected.