Retsch ZM 300, Руководство пользователя

Страница: 84 / 93

Maintenance
84
10.2 Servicing
To guarantee the reliability and operational safety of the device, the following servicing work
must be carried out as necessary, and at least once a month.
10.2.1 Checking the roller on the closing pin for ease of movement and oiling where
necessary
Check and oil the locking pin as follows:
Fig. 63: Bottom of device hood
1. Switch on the device with the main switch
(16) at the rear of the device.
➔
The touch display (6) is activated and the
background of the control dial (7) briefly
lights up in blue.
2. Press on the touch display (6) to unlock
the device hood (2).
3. Open the device hood (2) by hand.
4. Switch off the device with the main switch
(16) on the back while the device hood (2)
is open.
➔
Touch display (6) goes out.
➔
The device is switched off and the device
hood (2) is open ( Fig. 63 ).
Fig. 64: Locking pin
5. Check the rollers of the locking pin (8) for
smooth movement ( Fig. 64 ).
6. If necessary, oil the rollers of the locking
pin (8) with sewing machine oil.
7. Switch on the device with the main switch
(16) at the rear of the device.
➔
The touch display (6) is activated and the
background of the control dial (7) briefly
lights up in blue.
8. Close the device hood (2) by hand and
hold it in closed position for approx. 2
seconds. Pay attention to the acoustic
signals.
➔
The device hood (2) is locked and held
closed by the locking pin (8).
➔
Locking pin (8) is checked and oiled if
necessary.
No
. Component
2 Device hood
6 Touch display
7 Control dial
8 Locking pin
2
8
6
8
7