Retsch ZM 300, Руководство пользователя

Страница: 44 / 93

Operating the device
44
Fig. 29: Device with cyclone separator
12. Press on the touch display (6) to start
the grinding process.
13. The sample material is automatically fed in
via the chute (28) of the DR 100 feed unit
(33) and ground.
14. Observe the performance indicator on the
touch display (6) to assess the uniformity of
the grinding process.
➔
The sample material is ground.
15. Press on the touch display (6) to stop
the grinding process.
16.
Optional: Use the “Automatic stop” setting
so that the process is stopped
automatically by the device and the feed
unit.
17. Remove the sample material from the
collection receptacle (30) of the cyclone
separator (29) (
Fig. 29 ) .
➔
The sample material is ready for further
processing.
No. Component
2 Device hood
6 Touch display
7 Control dial
10 Interior
28 Chute of the DR 100 feed unit
29 Cyclone separator
30 Collection receptacle of cyclone separator
32 Hopper of the DR 100 feed unit
33 DR 100 feed unit
34 Toggle screw for unscrewing or screwing
down the hopper
35 Display of the DR 100 feed unit
38 Toggle screw
NOTICE For explanation on manual operation of the DR 100, please refer to the DR 100 manual.
6.8 Sample material with recommended grinding gear
Below is a list of recommendations on which grinding tools to use according to the sample
material in order to achieve the best result.
The following list does not take into account all possible materials, but serves for
orientation. A detailed database and references can be found at:
•
www.retsch.de
•
myRetsch portal (see "Controlling the device with the touch display/ myRetsch")
For further assistance, please contact our application laboratory, our field service
consultant or an authorised representative.
29
30