Retsch ZM 300 Скачать руководство пользователя страница 26

Страница: 26 / 93

Packaging, Transport and Installation

4.1 Packaging

The packaging has been adapted to the mode of transport. It complies with the generally
applicable packaging guidelines.

NOTICE

N2.0001

Complaint or return

Keeping the packaging

−

Inadequate packaging and insufficient securing of the device can

jeopardise the warranty claim in the event of a complaint or return.

•

Keep the packaging for the duration of the warranty period.

4.2 Transport

NOTICE

N3.0017

Damage to components

Transport

−

Mechanical or electronic components may be damaged during transport.

The device must not be knocked, shaken or thrown during transport.

•

Move the device gently during transport

NOTICE

N4.0014

Complaints

Incomplete delivery or transport damage

−

The forwarding agent and Retsch GmbH must be notified immediately in

the event of transport damage. It is otherwise possible that subsequent
complaints will not be recognised.

•

Please check the delivery on receipt of the device for its
completeness and intactness.

•

Notify your forwarding agent and Retsch GmbH within 24 hours.

4.3 Temperature Fluctuations and Condensation

NOTICE

N5.0016

Damaged components due to condensation

Temperature fluctuations

−

The device may be exposed to substantial fluctuations in temperature

during transport. The ensuing condensation can damage electronic
components.

•

Wait until the device has acclimatised before putting it into service.

Содержание ZM 300






























































































Результаты поиска

Содержание ZM 300

Отзывы:

Похожие инструкции для ZM 300

Бренды по названию

Популярные бренды

Retsch ZM 300, Руководство пользователя

Результаты поиска

Содержание ZM 300

Отзывы:

Похожие инструкции для ZM 300

Бренды по названию

Популярные бренды