Respironics bilichek Скачать руководство пользователя

Страница: 3 / 36

BiliChek Service Manual

1014988

Limited Warranty

Respironics warrants that the Bili

Chek

device shall be free from defects of workmanship and materials and will perform in

accordance with the product specifications for a period of one year from the date of sale by Respironics. If the product fails to

perform in accordance with the product specifications, Respironics will repair or replace -at its option - the defective material or

part. Respironics will pay customary freight charges from Respironics to the dealer location only. This warranty does not cover

damage caused by accident, misuse, abuse alteration, and other defects not related to materials or workmanship.

Respironics disclaims all liability for economic loss, loss of profits, overhead, or consequential damages which may be claimed

to arise from any sale or use of this product. Some states do not allow the exclusion or limitation of incidental or consequential

dames, so the above limitation or exclusion may not apply to you.

This warranty is given in lieu of all other express warranties. In addition, any implied warranty, including any warranty of

merchantability or fitness for the particular purpose, is limited to years. Some states do not allow limitations on how long an

implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may

also have other rights which vary from state to state.

The warranty for repairs is ninety days for labor and one year on the part(s) that was replaced.

To exercise your rights under this warranty, contact Respironics Inc. at 1-800-345-6443 (US and Canada only) or 1-724-387-

4000.

Visit Respironics Home Page on the World Wide Web: www.respironics.com

Содержание bilichek





































Результаты поиска

Содержание bilichek

Отзывы:

Похожие инструкции для bilichek

Бренды по названию

Популярные бренды

Respironics bilichek, Руководство по обслуживанию

Результаты поиска

Содержание bilichek

Отзывы:

Похожие инструкции для bilichek

Бренды по названию

Популярные бренды