background image

        BiliChek Service Manual

16

1014988

Press F2 to toggle between the formats, and F1 to

accept your choice and advance to setting the time.

Setting the time

After choosing the time format SET appears on the display

and the current clock time will be shown.

The hour digits will be flashing

Press F2 to scroll through the hours.

Press F1 to accept the hour and the minute digits will

begin flashing.

Press F2 to scroll through the minutes.

Press F1 to accept your choice and advance to the next

function.

Press F2 to toggle between the formats, and F1 to

accept and to advance to setting the date.

Setting the date

Depending on the format selected, the current month or day

digit will flash.

Press F2 to scroll through the choices.

Press F1 to accept and the next digit will begin

flashing.

Press F2 to scroll through the choices.

Press F1 to accept, and the first year digit will begin

flashing.

Press F2 to scroll through the digits.

Press F1 to accept and the second year digit will begin

flashing.

Press F2 to scroll the digits.

Press F1 to accept and the date will be saved and the

display will return to the home screen.

Selecting the date format

The unit will display the date in the Month/Day format or the

Day/Month format.

NOTE:

 the Month/Day format is the default setting.

Содержание bilichek





































Отзывы: