Renson Healthbox II, Руководство пользователя

Страница: 80 / 124

80
en
Healthbox
®
II (Compact) & Healthbox
®
Smartzone
The Healthbox can be attached to a wall using 4 screws by means of the integrated fixture holes
in the base of the fan casing.
• The machine can be attached to the wall/ceiling using the correct screws for the surface in
question, preferably attach without vibration to a solid wall with a minimum mass of
100 Kg/m
2
. Preferably, vibration dampening material is also used between the unit and the
assembly wall. For wall assembly, the equipment must be placed level.
• The equipment can also be attached using the supplied rope . For rope assembly, the fan must
be attached to a structure offering sufficient support.
Wall/ceiling Rope
Healthbox II
Follow the steps in
section 7.4.1
Follow the steps in
section 7.4.3
Healthbox II Compact –
Healthbox Smartzone
Follow the steps in
section 7.4.2
–
7 mm
4x
• In so far it is still necessary,
place the roof feed-through
if it is not present yet.
• Use the surface plate to
mark where the wall plugs
must be drilled into the
wall.
• Assemble wall plugs and
screws (suitable for the
surface type) to the wall.
Make sure that the screw
heads stick approximately
7 mm out of the wall.
Healthbox II
Compact
320 mm
320 mm
Healthbox II
320 mm
240 mm
➊
7.4.1 • Wall/ceiling installation of Healthbox
®
II (Compact)