Renson Healthbox II, Руководство пользователя

Страница: 101 / 124

101
en Healthbox
®
II (Compact) & Healthbox
®
Smartzone
• The “Fan Not Ready” screen appears after a successful linking procedure:
(takes about 1 minute).
• The following screen appears when the link has not been established:
“Fan connection – failed” . Repeat this procedure.
7.10.3 • Calibrating with the TouchDisplay
First complete the steps mentioned in section 7.10.
• When powering up, a screen appears that allows you to set the day and
clock :
– The ‘day’ lights up. Use
▲
or
▼
to switch to the relevant day.
Press
■
to confirm your choice.
– The ’hour’ lights up. Use
▲
or
▼
to switch to the hour.
Press
■
to confirm your choice.
• The screen “ select country ” appears. You can select a specific country and
its relevant factory settings by using
▲
and
▼
.
Choose your county and confirm with
■
.
• The screen “ Fan connection ” appears and “ update link ” lights up now it is time
to ‘link’ the Healthbox
®
II to the TouchDisplay; the linking has to be performed
within close range of the Healthbox
®
II; it is advised to link the TouchDisplay
and Healthbox
®
II within the same room at a distance of >3m.
– Briefly press the button LINK on the main print board of the Healthbox.
The green LED above this button will now blink.
– Now press
■
on the TouchDisplay. An additional line will appear at the
bottom of the display portraying: “ linking ”.
Print board: LINK button